Please wait while the page loads...

2020 Toyota Corolla Check Engine Light Flashing

Although there are plentiful possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several prevalent causes comprising something as prevailing as a loose gas cap. Further prevalent reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2020 Toyota Corolla was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continually detecting conditions while sending data to the electrical control team. If the electrical control team detects that the data is out of factory specifications, the Check Engine Light lights up telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what explicitly is untrue nor what to do about it. That’s where we come in; Nalley Toyota of Roswell provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service mechanical.

Will the check engine light reset itself?

The check engine light on your 2020 Toyota Corolla will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Toyota Corolla light will go off after about 20-40 miles. If you drive over that deposit and the light is still on, you will need to bring it in to Nalley Toyota of Roswell so the light and code can be double-checked and reset.

Is it safe to drive your 2020 Toyota Corolla with the check engine light on?

This question is not excessively effortless because it each depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is typically indicated by a possible glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more alarming problem. If the check engine light is shining, this means that there is a alarming issue and it is recommended to service your Toyota Corolla suddenly. Call the specialists at Nalley Toyota of Roswell by dialing 7707637398 so you can describe the issues. Or reduce your speed and bring your 2020 Toyota to our certified mechanics as soon as convenient.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2020 Toyota Corolla is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2020 Toyota Corolla. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can opt for a assortment of discrete things. It can be as real as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2020 Toyota Corolla, contact Nalley Toyota of Roswell. Our Toyota service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing. Contact Nalley Toyota of Roswell today!

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy appropriately. It could be anything from a bad sensor to plug wires needing to be replaced. Since every check engine code has its own level of severity, it is laborious to predict how innumerable miles you can drive with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Nalley Toyota of Roswell to assist find out if your vehicle is safe to drive in or if we advise a tow truck.

How much does it cost to get the engine light checked?

The middle cost for a check engine light diagnosis & testing is consistently between $88 and $111. The exceptional news, Nalley Toyota of Roswell offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more active failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the handy code reading and diagnosis.

2020 Toyota Corolla Check Engine Light

A flashing light indicates that the problem is rigid and if not taken care of rapidly may result in major wear and tear to the vehicle. If the check engine light in your 2020 Toyota Corolla starts flashing, that means that the problem needs precipitous attention and your Toyota should be brought in rapidly. This blinking light usually indicates a scrupulous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily boost the temperature of the catalytic converter to a point where damage is conceivable, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, classical or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Nalley Toyota of Roswell immediately by calling 7707637398. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Check Engine Light Service 2020 Toyota Corolla

What do you do when you’re driving along in your Toyota Corolla and suddenly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a few because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Toyota Corolla checked as soon as possible. Ignoring that warning could end up causing mighty damage to expensive engine components.

When your 2020 Toyota Corolla's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t feasible, a computer turns on your check engine light. This amber or yellow light is customarily labeled ā€œcheck engineā€ or ā€œservice engine soonā€, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word ā€œcheck.ā€

When the light turns on, the ECM stores an engine code or ā€œtrouble codeā€ in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized analyze tool that is used by our Toyota auto repair mechanics at Nalley Toyota of Roswell. There are also a number of somewhat bargain code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to suggest the issue and repair it.

What could cause the check engine light to come on in a 2020 Toyota Corolla?

When your check engine light comes on, this could be as natural as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a adequate problem that could cause adequate damage to your engine and come with a bizarre repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow customarily means something less adequate but a flashing check engine light hints that your vehicle’s engine is in adequate trouble and service is imperative rapidly. If your check engine light is flashing in your 2020 Toyota Corolla, we remarkably recommend not to drive the vehicle and schedule Toyota service at this moment. Below is a list of the most tolerable reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, prevailing as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2020 Toyota Corolla's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the honorable mixture of air and fuel that enters the cylinders in your engine. A intrusive O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are crucial for your 2020 Toyota Corolla. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are intrusive or traditional, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Corolla is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Toyota Corolla is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a intrusive mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2020 Toyota Corolla if it’s not installed properly. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound familiar, bring your Corolla to Toyota and have our team of certified technicians ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a scant bit more but could save you money from having to get scanty function and damage caused by scanty installation function corrected.
  • Your catalytic converter is intrusive or going intrusive. The catalytic converter is a part of your 2020 Toyota Corolla’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota of Roswell offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Toyota Corolla will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • Your 2020 Toyota Corolla has a vacuum leak. Every Toyota Corolla has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme fast.
  • The battery is poor or dead. The battery in your 2020 Toyota Corolla is every crucial. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a miniature decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • One of the most prevailing and frequent cause is that your 2020 Toyota Corolla gas cap is loose, damaged or missing. The gas cap for your 2020 Toyota Corolla serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a intrusive fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2020 Toyota Corolla, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

2020 Toyota Corolla Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Corolla. There are hundreds of contrasting codes that your check engine light can represent. While that sounds daunting, with some patience, tackling critical diagnostics will give you good-looking knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, lucid and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of practical OBD codes, there are also hundreds of practical reasons for the light, including:

  • Computer output circuit issues
  • Old Battery
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • O2 Sensor
  • Transmission issues

This is why it is considerable for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Toyota of Roswell at 7707637398 at this moment or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out abruptly by a certified Toyota mechanic. If the engine light comes on due to a relentless concern, you risk harmful your vehicle extra by not repairing the issue polite away.