Please wait while the page loads...

2016 Toyota Tacoma Check Engine Light Flashing

Although there are countless achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various commonplace causes encompassing something as amicable as a loose gas cap. Back-up commonplace reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, faulty emissions control part, or defective spark plugs to name plentiful. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2016 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its meaningful systems. The sensors are continually detecting conditions while sending data to the computerized control team. If the computerized control team detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is awry nor what to do about it. That’s where we come in; Nalley Toyota of Roswell provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

How much does it cost to get the engine light checked?

The middle cost for a check engine light diagnosis & testing is frequently between $88 and $111. The excellent news, Nalley Toyota of Roswell offers complimentary multi-point inspections and free diagnostics, in most cases, to help select the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it excellent to get the suitable code reading and diagnosis.

2016 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard swiftly illuminates, but in reality, it is not something that should cause you to shut down in fear correct away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also conscious as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of chance codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling decisive diagnostics will give you nice knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and careful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Bad Spark Plugs
  • Emissions controls issues
  • Ignition system faults
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Old Battery
  • Transmission issues
  • Fuel and air metering systems problems

This is why it is extraordinary for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a effective concern, you risk damaging your car further by not repairing the issue decent away. Call Nalley Toyota of Roswell at 7707637398 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out swiftly by a certified Toyota mechanic.

Is it safe to drive your 2016 Toyota Tacoma with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is usually indicated by a suitable glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more main problem. If the check engine light is glaring, this means that there is a main issue and it is recommended to service your Toyota Tacoma shortly. Call the experts at Nalley Toyota of Roswell by dialing 7707637398 so you can describe the issues. Or reduce your speed and bring your 2016 Toyota to our certified mechanics as soon as achievable.

2016 Toyota Tacoma Check Engine Light

A glaring light indicates that the problem is hazardous and if not taken care of instantly may result in major damage to the car. If the check engine light in your 2016 Toyota Tacoma starts glaring, that means that the problem needs speedy attention and your Toyota should be brought in instantly. This flashing light frequently indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can promptly raise the temperature of the catalytic converter to a point where damage is viable, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can certainly be the cause. A detrimental, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair. If your check engine light is flashing, please contact our team of automotive experts at Nalley Toyota of Roswell instantly by calling 7707637398.

Check Engine Light Service 2016 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and abruptly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Toyota Tacoma checked as soon as compelling. Ignoring that warning could end up causing major damage to expensive engine parts.

When your 2016 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t constitutional, a computer turns on your check engine light. This amber or yellow light is naturally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our Toyota auto repair mechanics at Nalley Toyota of Roswell. There are also a number of comparatively low-cost code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced licensed to pick the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2016 Toyota Tacoma will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Toyota Tacoma light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Nalley Toyota of Roswell so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is glaring, we suggest that you pull over and contact Nalley Toyota of Roswell to help mean if your vehicle is safe to drive in or if we suggest a tow truck. Since each check engine code has its own level of severity, it is complicated to predict how several miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced.

What could cause the check engine light to come on in a 2016 Toyota Tacoma?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a exciting repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow typically means something less hazardous but a flashing check engine light suggests that your vehicle’s engine is in hazardous trouble and service is needed promptly. If your check engine light is flashing in your 2016 Toyota Tacoma, we exceedingly advise not to drive the vehicle and schedule Toyota service today. Below is a list of the most present reasons your check engine light can come on:

  • One of the most natural and frequent cause is that your 2016 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2016 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Toyota Tacoma, initial thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, current as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the proper mixture of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a vehicle to fail an emissions test.
  • Your 2016 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to notable heat or extreme chilly.
  • New Spark Plugs or Plug Wires are necessary for your 2016 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or distinctive item can wreak havoc on your 2016 Toyota Tacoma if it’s not installed accurately. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound accepted, bring your Tacoma to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts initial place might rate a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2016 Toyota Tacoma’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota of Roswell offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause distinctive problems from overheating.
  • The battery is low or dead. The battery in your 2016 Toyota Tacoma is every vigorous. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a bit decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2016 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few other ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2016 Toyota Tacoma. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name some. With that being said, the check engine light can mean a variety of discrete things. It can be as plain as your gas cap being loose or as alarming as engine knocking. If your check engine light is on in your 2016 Toyota Tacoma, contact Nalley Toyota of Roswell. Contact Nalley Toyota of Roswell today! Our Toyota service department can help you find out what code is turning your check engine light on or observe why your check engine light is shining.