Please wait while the page loads...

2013 Toyota Tundra Check Engine Light Flashing

Although there are countless capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless normal causes including something as detectable as a loose gas cap. Supplemental normal reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2013 Toyota Tundra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is liable nor what to do about it. That’s where we come in; Nalley Toyota of Roswell provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service experienced.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is shining, we recommend that you pull over and contact Nalley Toyota of Roswell to help pick if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

What Does the Check Engine Light Mean?

One of the most continually misunderstood lights or indicators in your 2013 Toyota Tundra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2013 Toyota Tundra. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of odd things. It can be as real as your gas cap being loose or as rigid as engine knocking. If your check engine light is on in your 2013 Toyota Tundra, contact Nalley Toyota of Roswell. Contact Nalley Toyota of Roswell today! Our Toyota service department can assist you find out what code is turning your check engine light on or investigate why your check engine light is shining.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota Tundra will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota Tundra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Toyota of Roswell so the light and code can be double-checked and reset.

Is it safe to drive your 2013 Toyota Tundra with the check engine light on?

If the check engine light is flashing, this means that there is a dangerous issue and it is recommended to service your Toyota Tundra instantly. This question is not excessively simple because it any depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is commonly indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more precarious problem. Call the experts at Nalley Toyota of Roswell by dialing 7707637398 so you can describe the issues. Or lower your speed and bring your 2013 Toyota to our certified mechanics as soon as convenient.

Check Engine Light Service 2013 Toyota Tundra

What do you do when you’re driving along in your Toyota Tundra and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota Tundra checked as soon as likely. Ignoring that warning could end up causing large damage to costly engine components.

When your 2013 Toyota Tundra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t good, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota of Roswell. There are also a number of comparably inexpensive code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an competent experienced to opt for the issue and repair it.

2013 Toyota Tundra Check Engine Light

A flashing light indicates that the problem is relentless and if not taken care of quickly may result in big damage to the car. If the check engine light in your 2013 Toyota Tundra starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in quickly. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can instantly raise the temperature of the catalytic converter to a point where damage is convincing, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can altogether be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly fancy repair. If your check engine light is shining, please contact our squad of automotive advisors at Nalley Toyota of Roswell rapidly by calling 7707637398.

What could cause the check engine light to come on in a 2013 Toyota Tundra?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less unhealthy but a flashing check engine light indicates that your vehicle’s engine is in unhealthy trouble and service is crucial immediately. If your check engine light is flashing in your 2013 Toyota Tundra, we particularly advise not to drive the automobile and schedule Toyota service today. Below is a list of the most accepted reasons your check engine light can come on:

  • Your 2013 Toyota Tundra has a vacuum leak. Every Toyota Tundra has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to exciting heat or extreme crisp.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Toyota Tundra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota of Roswell offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota Tundra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tundra is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to authentic changes, like altitude. If your Toyota Tundra is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2013 Toyota Tundra if it’s not installed perfectly. These aftermarket components and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound acknowledged, bring your Tundra to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM components first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota Tundra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • One of the most present and innumerable cause is that your 2013 Toyota Tundra gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota Tundra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2013 Toyota Tundra, first thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is low or dead. The battery in your 2013 Toyota Tundra is every laborious. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you travel to work, but check our current service coupons and specials.
  • New Spark Plugs or Plug Wires are crucial for your 2013 Toyota Tundra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more hazardous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it actual to get the accessible code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The actual news, Nalley Toyota of Roswell offers complimentary multi-point inspections and free diagnostics, in most cases, to help select the cause of your check engine light.

2013 Toyota Tundra Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Tundra. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling cooperative diagnostics will give you instinctive knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, further and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Computer output circuit issues
  • Bad Spark Plugs
  • Ignition system faults
  • Emissions controls issues
  • Old Battery
  • O2 Sensor
  • Fuel and air metering systems problems

This is why it is persuasive for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Toyota of Roswell at 7707637398 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out suddenly by a certified Toyota mechanic. If the engine light comes on due to a perilous concern, you risk detrimental your car extra by not repairing the issue right away.