Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replenished. If you check engine light is flashing, we imply that you pull over and contact Nalley Toyota of Roswell to help indicate if your vehicle is reliable to drive in or if we imply a tow truck. Since every check engine code has its own level of severity, it is difficult to predict how countless miles you can drive with the warning light on.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more exacting failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it helpful to get the handy code reading and diagnosis. The average price for a check engine light diagnosis & testing is commonly between $88 and $111. The helpful news, Nalley Toyota of Roswell offers complimentary multi-point inspections and free diagnostics, in most cases, to help learn the cause of your check engine light.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota Sienna will generally shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going detailed, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota Sienna light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Nalley Toyota of Roswell so the light and code can be double-checked and reset.

Is it safe to drive your 2013 Toyota Sienna with the check engine light on?

If the check engine light is flashing, this means that there is a strict issue and it is recommended to service your Toyota Sienna urgently. This question is not exceedingly simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is continually indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more strict problem. Call the mentors at Nalley Toyota of Roswell by dialing 7707637398 so you can describe the issues. Or reduce your speed and bring your 2013 Toyota to our certified mechanics as soon as fitting.

Check Engine Light Service 2013 Toyota Sienna

What do you do when you’re driving along in your Toyota Sienna and swiftly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota Sienna checked as soon as feasible. Ignoring that warning could end up causing best wear and tear to expensive engine parts.

When your 2013 Toyota Sienna's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t definite, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota of Roswell. There are also a number of relatively low-priced code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

2013 Toyota Sienna Check Engine Light Flashing

Although there are plentiful capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless current causes incorporating something as simple as a loose gas cap. Additional current reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, faulty head gasket, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2013 Toyota Sienna was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are generally detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what definitely is inaccurate nor what to do about it. That’s where we come in; Nalley Toyota of Roswell provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service licensed.

What Does the Check Engine Light Mean?

One of the most often misunderstood lights or indicators in your 2013 Toyota Sienna is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot precise ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Toyota Sienna. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can represent a mixture of assorted things. It can be as various as your gas cap being loose or as memorable as engine knocking. If your check engine light is on in your 2013 Toyota Sienna, contact Nalley Toyota of Roswell. Our Toyota service department can help you determine what code is turning your check engine light on or diagnose why your check engine light is twinkling. Contact Nalley Toyota of Roswell today!

2013 Toyota Sienna Check Engine Light

A twinkling light indicates that the problem is serious and if not taken care of quickly may result in major damage to the vehicle. If the check engine light in your 2013 Toyota Sienna starts twinkling, that means that the problem needs immediate attention and your Toyota should be brought in quickly. This blinking light usually indicates a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is applicable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is blinking, please contact our squad of automotive experts at Nalley Toyota of Roswell promptly by calling 7707637398.

What could cause the check engine light to come on in a 2013 Toyota Sienna?

When your check engine light comes on, this could be as prevalent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a exquisite repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow typically means something less hazardous but a flashing check engine light indicates that your vehicle’s engine is in hazardous trouble and service is necessary immediately. If your check engine light is flashing in your 2013 Toyota Sienna, we highly suggest not to drive the car and schedule Toyota service today. Below is a list of the most prevalent reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Toyota Sienna’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Nalley Toyota of Roswell offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota Sienna will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • Your 2013 Toyota Sienna has a vacuum leak. Every Toyota Sienna has a vacuum system that performs a wide mixture of functions. The vacuum system also helps lower bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to notable heat or extreme congenial.
  • Your O2 Sensor (Oxygen Sensor) needs to be changed. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less dependable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota Sienna's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to elect for the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be changed. The mass airflow sensor in your Toyota Sienna is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to hopeful changes, like altitude. If your Toyota Sienna is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most conscious and plentiful cause is that your 2013 Toyota Sienna gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota Sienna serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on quickly after you put gas in your 2013 Toyota Sienna, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are mandatory for your 2013 Toyota Sienna. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more pricey repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Toyota Sienna if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound conscious, bring your Sienna to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • The battery is low or dead. The battery in your 2013 Toyota Sienna is every gargantuan. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't actually require maintenance. The price of a new one depends on the type of Toyota you drive, but check our actual service coupons and specials.

2013 Toyota Sienna Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard promptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Sienna. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling basic diagnostics will give you applicable knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Regrettably, accessible and basic vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Old Battery
  • Computer output circuit issues
  • Emissions controls issues
  • O2 Sensor
  • Transmission issues
  • Ignition system faults

This is why it is alarming for someone who does not have assorted of automotive knowledge to not assume what a code means. If the engine light comes on due to a exacting concern, you risk harmful your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Toyota mechanic. Call Nalley Toyota of Roswell at 7707637398 expeditiously or schedule your check engine light service online today!